GA15~26 GA11+~30
update:2019-10-20 17:06 Click:times
- brand
- model
- describe
Atlas Copco offers you industry-leading and reliable oil-injected screw compressors that reduce production costs and benefit more. GA15-26 High-quality, high-reliability air compressor with low initial investment and best performance in GA
introduce
Atlas Copco offers you industry-leading and reliable oil-injected screw compressors that reduce production costs and benefit more.
GA15-26 High-quality, high-reliability air compressor with low initial investment and best performance in GA11+-30 fixed speed air compressor
GA 15-26
Reliable superior air compressor
• GA initial investment is low, and good performance and service quality
• Thanks to the built-in dryer, the compressed air is dry and of high quality
• Efficient control of the compressor with the Elektronikon® controller
GA 11+-30
Performance reaches the highest level in the industry
• FAD free air displacement is highest
• Top power consumption and noise
• High quality dry compressed air thanks to built-in dryer
• Easy to monitor and maintain air compressors with high-resolution color display on Elektronikon® color controllers
GA 15-26
Atlas Copco's high-quality GA compressors address the challenges of everyday work and enable different solutions. Always ready to provide high quality compressed air, respond to all aspects of production, and ensure the cleanliness of the air network
Rugged motor and rotor
• GA15-26 uses high-efficiency motors and is compatible with new rotors for the most efficient use
• Gear transmission efficiency is 2-3% higher than belt drive
• Gear drive reliability and low maintenance
Leading monitoring
• Elektronikon®'s built-in cable outlet interface allows Ethernet connections for easy monitoring
• Output service, alarm, error detection and other signs, compressor start and stop
• Option to provide Elektronikon® color screen controller for further enhanced compressor remote control and service time display
High-tech oil and gas separator
• Avoid oil contamination: Benefit from vertical design of the oil tank to further reduce oil residue
• Minimal oil tank volume minimizes compressed air loss during loading and unloading
Complete compressed air solution
• Built-in dryer to avoid condensation and corrosion in the pipe network. Optional filter for compressed air quality to ISO Class 1
(<0.01ppm)
• Standard configuration water separator
• In addition, the built-in dryer is more energy efficient with a non-destructive electronic drain valve
Easy to install
• Plug and play design to avoid installation troubles or tailored users
• Optional with built-in dryer model
• Easy to transport by forklift
• Small footprint
GA 11+-30:
Industry leading compressor
The leading GA11+-30 compressor has the best gas volume in the industry, refreshing the industry record. The all-in-one solution delivers high-quality compressed air in low-cost operations with scalable monitoring requirements.
Reliable motor and drive system
• Gearbox drive is maintenance-free and durable
• Motor bearings are lubricated for life, avoiding subsequent troubles
• FAD free air displacement increased by 6-17% and power consumption decreased by 3-12% thanks to installation and new rotors
Electric control cabinet
• Further increase the life of electronic components by reducing the temperature in the cabinet
• Standard phase sequence protector to avoid damage to the electrical cabinet
Leading control
• High-tech Elektronikon® color version controller, alarm, compressor start-stop and maintenance cycle display
• Option ES6, can control 6 compressors
Complete compressed air solution
• Built-in dryer with counter-flow heat exchanger, built-in water separator, optional dryer energy-saving cycle
• Built-in dryer can be added to the option UD+ filter to reduce oil content to 0.01ppm
• The water separator in the aftercooler can remove water almost 100% in all cases and comes standard with a non-destructive electronic drain valve
Energy saving features
• Optional energy recovery system
• Optional cycle energy saving fan to reduce energy consumption
型号 | 重量(KG) | 出口 尺寸 | |||||||||
最大工作压力 | 流量FAD* | 电机功率 | 噪音** | 现场型 | 全性能 | ||||||
bar(e) | l/s | m³/min | kW | dB(A) | kg | lbs | kg | lbs | |||
GA 15 | 7.5 | 7.5 | 45.8 | 2.75 | 15 | 65 | 421 | 928 | 474 | 1045 | G1" |
8.5 | 8.5 | 42 | 2.52 | 15 | 65 | 421 | 928 | 474 | 1045 | G1" | |
10 | 10.5 | 38.8 | 2.33 | 15 | 65 | 421 | 928 | 472 | 1041 | G1" | |
13 | 13 | 32.6 | 1.95 | 15 | 65 | 421 | 928 | 470 | 1036 | G1" | |
GA 18 | 7.5 | 7.5 | 56.5 | 3.39 | 18.5 | 67 | 431 | 950 | 495 | 1091 | G1" |
8.5 | 8.5 | 53.8 | 3.23 | 18.5 | 67 | 431 | 950 | 495 | 1091 | G1" | |
10 | 10.5 | 49 | 2.94 | 18.5 | 67 | 431 | 950 | 493 | 1087 | G1" | |
13 | 13 | 40.7 | 2.44 | 18.5 | 67 | 431 | 950 | 491 | 1082 | G1" | |
GA 22 | 7.5 | 7.5 | 65.1 | 3.91 | 22 | 68 | 440 | 970 | 495 | 1091 | G1" |
8.5 | 8.5 | 63.5 | 3.81 | 22 | 68 | 440 | 970 | 495 | 1091 | G1" | |
10 | 10.5 | 53.3 | 3.2 | 22 | 68 | 440 | 970 | 493 | 1087 | G1" | |
13 | 13 | 49 | 2.94 | 22 | 68 | 440 | 970 | 491 | 1082 | G1" | |
GA 26 | 7.5 | 7.5 | 72.9 | 4.37 | 30 | 69 | 500 | 1102 | 558 | 1230 | G1" |
8.5 | 8.5 | 68.1 | 4.09 | 30 | 69 | 500 | 1102 | 558 | 1230 | G1" | |
10 | 10.5 | 61.5 | 3.69 | 30 | 69 | 500 | 1102 | 556 | 1226 | G1" | |
13 | 13 | 54.7 | 3.28 | 30 | 69 | 500 | 1102 | 554 | 1221 |
G1" |
* Unit performance parameters are tested according to ISO 1217, Ed. 3, Annex C-1996
Reference conditions:
- Absolute intake pressure: 1 bar
- Air intake temperature: 20 ° C
FAD is working on the following stress tests
- 7.5bar model at 7 bar
- 8.5 models at 8 bar
- 10.5bar model at 10 bar
- 13 models at 12.5 bar
* * Noise level according to ISO2151/Pneurop/CagiPN8NTC2
GA15-26's built-in dryer pressure dew point is: 5 ° C
GA 11+-30 technical parameters
最大工作压力 | 流量FAD* | 电机功率 | 噪音** | 重量(KG) | 出口 尺寸 | ||||||
型号 | 现场型 全性能 | 现场型 全性能 | |||||||||
bar(e) | bar(e) | l/s | m³/min | kW | dB(A) |
![]()
|
![]()
|
||||
GA 11+ 7.5 | 7.5 | 7.3 | 35.8 | 2.1 | 11 | 63 | 410 | 455 | G1" | ||
8.5 | 8.5 | 8.3 | 33.8 | 2 | 11 | 63 | 410 | 455 | G1" | ||
10 | 10 | 9.8 | 30.3 | 1.8 | 11 | 63 | 410 | 455 | G1" | ||
13 | 13 | 12.8 | 25.2 | 1.5 | 11 | 63 | 410 | 455 | G1" | ||
GA 15+ 7.5 | 7.5 | 7.3 | 46.9 | 2.8 | 15 | 64 | 420 | 470 | G1" | ||
8.5 | 8.5 | 8.3 | 43.8 | 2.6 | 15 | 64 | 420 | 470 | G1" | ||
10 | 10 | 9.8 | 39.8 | 2.4 | 15 | 64 | 420 | 470 | G1" | ||
13 | 13 | 12.8 | 32.8 | 2 | 15 | 64 | 420 | 470 | G1" | ||
GA 18+ 7.5 | 7.5 | 7.3 | 58.1 | 3.5 | 18.5 | 65 | 440 | 500 | G1" | ||
8.5 | 8.5 | 8.3 | 54.3 | 3.3 | 18.5 | 65 | 440 | 500 | G1" | ||
10 | 10 | 9.8 | 48.7 | 2.9 | 18.5 | 65 | 440 | 500 | G1" | ||
13 | 13 | 12.8 | 41.1 | 2.5 | 18.5 | 65 | 440 | 500 | G1" | ||
GA22+ 7.5 | 7.5 | 7.3 | 68.2 | 4.1 | 22 | 66 | 455 | 515 | G1" | ||
8.5 | 8.5 | 8.3 | 64.5 | 3.9 | 22 | 66 | 455 | 515 | G1" | ||
10 | 10 | 9.8 | 58.1 | 3.5 | 22 | 66 | 455 | 515 | G1" | ||
13 | 13 | 12.8 | 50.7 | 3 | 22 | 66 | 455 | 515 | G1" | ||
GA26+ 7.5 | 7.5 | 7.3 | 79.8 | 4.8 | 26 | 67 | 525 | 595 | G1" | ||
8.5 | 8.5 | 8.3 | 76.2 | 4.6 | 26 | 67 | 525 | 595 | G1" | ||
10 | 10 | 9.8 | 69.3 | 4.2 | 26 | 67 | 525 | 595 | G1" | ||
13 | 13 | 12.8 | 60.1 | 3.6 | 26 | 67 | 525 | 595 | G1" | ||
GA 30 7.5 | 7.5 | 7.3 | 90 | 5.4 | 30 | 68 | 540 | 610 | G1" | ||
8.5 | 8.5 | 8.3 | 86.4 | 5.2 | 30 | 68 | 540 | 610 | G1" | ||
10 | 10 | 9.8 | 79.8 | 4.8 | 30 | 68 | 540 | 610 | G1" | ||
13 | 13 | 12.8 | 68.7 | 4.1 | 30 | 68 | 540 | 610 |
G1" |
* Unit performance parameters are tested according to ISO 1217, Ed. 3, Annex C-1996
Reference conditions:
- Absolute intake pressure: 1 bar
- Air intake temperature: 20 ° C
FAD is working on the following stress tests
- 7.5bar model at 7 bar
- 8.5 models at 8 bar
- 10 models at 9.5 bar
- 13 models at 12.5 bar
* Unit performance parameters are tested according to ISO 1217, Ed. 3, Annex C-1996
Reference conditions:
- Absolute intake pressure: 1 bar
- Air intake temperature: 20 ° C
FAD is working on the following stress tests
- 7.5bar model at 7 bar
- 8.5 models at 8 bar
- 10 models at 9.5 bar
- 13 models at 12.5 bar
* * Noise level according to ISO2151/Pneurop/CagiPN8NTC2
The built-in dryer pressure dew point of GA11+-30 is: 2°C-3°C
Dimensions
GA15-26:
L: 1225 mm W: 695mm H: 1475 mm
GA11+-22:
H: 1475 mm L: 1255 mm W: 692 mm
GA26+-30:
上一篇:GA5~11(5~11KW)
下一篇:GA 45-75 VSD iPM permanent magnet compressor technical param
more