Ingersoll Rand M series screw air compressor

 

Superior host design

 

At the heart of the Ingersoll Rand screw air compressor micro oil type is our rugged and reliable mainframe. Our compressor mainframes are used in thousands of compressors around the world and are known for their zero failure and minimum maintenance costs.

 

We are the only company to use the highest quality face-to-face roller bearing on the mainframe. Roller cone bearings are subjected to thrust loads in line contact, which greatly extends the life of the mainframe. The main engine is also equipped with a bearing oil groove. When the main engine is stopped, the coolant can be stored. This ensures that the bearing can be fully lubricated when restarted, thus extending the life of the bearing.

 

Unparalleled reliability

 

Our durable, all-in-one drive gear is the only drive train in the industry that requires no maintenance. The position of the main unit and the motor remains permanently coaxial, so no recalibration is required during normal operation.

 

The entire drive system is sealed to prevent dust and dirt from entering. Moreover, the three-lip shaft seal prevents coolant from leaking into the motor.

 

High efficiency motor

 

Each compressor is equipped with a durable, high-efficiency motor that operates most efficiently at full load and saves energy.

 

High temperature resistant design

 

Ingersoll Rand micro-oil screw air compressors operate stably at ambient temperatures in most countries of the world. Past experience shows that even in areas with relatively mild climates, air compressors are still affected by other heat sources. Therefore, the Ingersoll Rand 46°C high-temperature design unit can fully adapt to changes in the surrounding environment, and will never There is a downtime caused by overheating of the unit or excessive ambient temperature. Correspondingly, the daily maintenance required is also much less than the air compressor of the traditional design standard.

 

Intake valve

 

(1) The geometrically optimized flow channel design ensures the low pressure loss and high efficiency of the intake valve during operation;

 

(2) Adjustable intake bypass design, which can effectively reduce noise when the air compressor is unloaded;

 

(3) The design of the integrated control block is controlled by a single solenoid valve, which greatly simplifies the piping design and minimizes the possibility of leakage;

 

(4) By adjusting the bolts, the flow of the bleed and intake air can be adjusted very conveniently, which is very convenient for adjusting the no-load pressure and the venting time;

 

(5) Less wearing parts, convenient after-sales service and maintenance;

 

(6) High-quality parts and materials ensure extremely high durability.

 

Separation of oil and gas

 

It minimizes oil content in the equipment and reduces the number of coolant replenishments. This design also reduces the effect on the oil content of the compressed air when the oil is too much or too little in the separator.

 

(1) a mixture of oil and gas is tangentially entered from the bottom of the separator;

 

(2) The oil is provided with a new baffle mechanism;

 

(3) Oil separation mechanism: centrifugation, coagulation, and interception;

 

(4) The oil content of the compressed air after the triple separation of the oil is less than 2 PPM.

 

Unique cooling method

 

The aftercooler is installed at the intake end of the unit to ensure that the temperature of the compressed air after cooling is only 15 °F / 8 °C above the ambient temperature, and then post-processed into the gas system.

 

Gas water separator

 

(1) Standard gas water separator;

 

(2) higher air quality;

 

(3) Reduce the load on the post-processing system and make it more energy efficient.

 

Leading coolant solution - Ultra EL super coolant

 

(1) 16,000 hours / 3 years of lubricant life;

 

(2) Excellent cooling performance;

 

(3) Effectively reduce wear;

 

(4) Strong corrosion inhibition;

 

(5) Better separation effect.

 

Microcomputer intelligent controller

 

(1) The microcomputer intelligent controller is very easy to master and operate;

 

(2) With the microcomputer intelligent controller, the operating parameters can be adjusted to the machine;

 

(3) The best state required for the group to operate;

 

(4) The optional Chinese display controller is easier to understand.

 

Electric control box

 

(1) Electrical protection rating IP55;

 

(2) Star-delta (Y-) conversion start, reducing the impact of the starting current, reducing the starting current peak to 33%;

 

(3) Provide a soft start option;

 

(4) Extends the life of the motor.

 

Compressor unit

 

To meet the requirements of your air compression system, we have both air-cooled and water-cooled cooling options.

 

Easy service

 

The components in the unit are arranged in a well-organized manner and are highly maintainable. Once the panel is removed, maintenance of all components is achieved.

 

Factory test

 

To ensure that your compressors perform optimally under a wide range of conditions, we have state-of-the-art computer test systems, each of which undergoes operational performance tests under different environmental conditions before leaving the factory.

 

Leak-free design

 

SAE standard type 0 sealing ring can completely prevent leakage.